Huawei Quidway AR 28 Series Installation Manual page 84

Quidway AR 28 Series Routers Installation Manual
3: Exit to Main Menu
Enter your choice(1-3):1
3) In Net Port Download Menu, select <1> for example to change the download
parameters as follows:
Change Boot Parameter:
'.' = clear field;
boot device
processor number
host name
file name
inet on ethernet (e) : 169.254.10.10
inet on backplane (b):
host inet (h)
gateway inet (g)
user (u)
ftp password (pw) (blank = use rsh):
flags (f)
target name (tn)
startup script (s)
other (o)
When upgrading with TFTP, set these parameters:
file name: Name of the file to be downloaded
inet on ethernet (e): IP address of the Ethernet interface for downloading
host inet (h): IP address of TFTP Server
flags (f): 0x80
target name (tn): Name for the file to be saved on Flash memory. If no name is provided,
the one used for the last upgrade is used. If the file name already exists, the following
message appears after the file is downloaded asking whether you need to overwrite the
original file:
Loading...done
11162108 bytes downloaded.
flash:/main.bin already exist.
Overwrite it?(Y/N):
Enter <Y> to overwrite the original file or <N> to return to the Net Port Download Menu.
When upgrading with FTP, set these parameters:
file name: Name of the file to be downloaded
inet on ethernet (e): IP address of the Ethernet interface for downloading
host inet (h): IP address of FTP Server
user (u): User name, same as the one configured at FTP Server.
'-' = go to previous field;
: fei0
: 0
: 8040
: M8240ram.arj
: 169.254.10.11
:
: 8040
: 0x0
:
:
:
Huawei Technologies Proprietary
6-11
Chapter 6 Router Maintenance
^D = quit