Huawei Quidway AR 28 Series Installation Manual page 69

Quidway AR 28 Series Routers Installation Manual
2) Set the serial interface parameters. As shown in Figure 5-4, in the properties
dialog box of the serial interface, set the baud rate to 9600, data bit to 8, no parity
check, stop bit to 1, and flow control to none. Then, click <OK> to return to the
HyperTerminal window.
Figure 5-4 Setting serial interface parameters
3) Set
HyperTerminal to enter the properties setting window as shown in Figure 5-5.
Select the terminal emulation type to be VT100 or Auto detect, and click <OK> to
return to the HyperTerminal window.
HyperTerminal properties.
Huawei Technologies Proprietary
Chapter 5 Startup and Configuration of the Router
Select [File\Properties\Settings]
5-3
in the