Huawei Quidway AR 28 Series Installation Manual page 78

Quidway AR 28 Series Routers Installation Manual
In this menu select <3> for example to change the file type of a.bin. The console screen
displays:
Set this file as:
1.
2.
3.
Enter your choice(1-3):
To use a.bin as the main boot file, select <1> in this menu. Upon validation of the setting,
the file type of the original main boot file changes to N/A. Now, the a.bin file is the first
boot file.
4) Display applications in Flash memory.
Select <4> in Boot Menu. The console screen displays:
M=MAIN
**************************************************************************
NO. Name
1 main.bin
2 backup.bin
3 a.bin
4 s_system.bin
**************************************************************************
There are <4> application files.
Press <Enter> key to continue
Press <Enter> to return to Boot Menu.
5) Clear the application super password.
Selecting this option allows you to access system view at a reboot. This, however, is a
one-time operation. You must provide the super password at subsequent reboots.
6) Clear console authentication.
This option allows you to log in from the console port without authentication.
Select the option; exit and then restart the router. The screen displays "Login
authentication ignored", allowing you to log in from the console port without
authentication.
Note that this is a one-time operation. It takes effect at a reboot. Console authentication
is required however at subsequent reboots.
7) Start up and ignore configuration.
Select <7> in Boot Menu. The system sets an Ignore flag to Flash memory and
displays:
Flag set successfully.
Main
Backup
Exit
B=BACKUP
Size
5988025
5985198
5987491
5988022
Huawei Technologies Proprietary
1
S=SECURE
Type
N/A
B
M
S
6-5
Chapter 6 Router Maintenance
Time
Oct/10/2002 10:10:10
Oct/10/2002 10:10:10
Oct/10/2002 10:10:10
Oct/10/2002 10:10:10