Advertisement
Safety precautions
Caution: Read this page carefully to ensure safe operation.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT SAFEGUARDS
Please read all of the safety and operating instructions before operating this unit. For best results, follow all warnings placed on the
unit and adhere to the operating and use instructions. These safety and operating instructions should be retained for future reference.
1. Power sources — The appliance should be connected to a power supply
only of the type described in the instruction manual or as marked on the
appliance.
2. Power-cord protection — Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
3. Enclosure removal —Never remove the enclosure. If the internal parts are
touched accidentally, a serious electric shock might occur.
4. Drop — Do not drop the appliance or apply strong shock to it. (Damage due
to dropping the appliance is not covered by the warranty.)
5. Ventilation — Avoid hindering the ventilation of the appliance by covering
it with a cloth, etc.
6. Abnormal smell — If an abnormal smell or smoke is detected, immediately
turn the power OFF and pull out the power cord. Contact your dealer or
nearest service center.
7. Heat — Avoid placing the appliance under direct sunlight or near a source
of heat such as heating equipment. Particularly, never leave it in an
automobile or on the dashboard.
8. Temperature — The appliance may not function properly if used at
extremely low, or freezing temperatures. The ideal ambient temperature
is above +5°C (41°F).
9. Water and moisture — The appliance shall not be exposed to dripping and
splashing - for example, near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool, etc.
10.Dust and moisture — Avoid places where is dusty or where the humidity
is high.
11.Vibrations — Avoid placing the appliance on an unstable place such as a
shelf or in a place subject to vibrations.
The marking of products using lasers (For countries other than
U.S.A., U.S.-Military and Canada)
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
The marking this product has been classified as Class 1.
It means that there is no danger of hazardous radiation
outside the product.
Location: Back panel
12.Magnetic fields — Keep the appliance away from sources of magnetic
fields such as TV sets, speaker systems, radios, motorized toys or
magnetized objects.
13.Cleaning — Unplug this appliance from the wall outlet before cleaning. Do
not use volatile solvents such as alcohol, paint thinner, gasoline, or
benzine, etc. to clean the cabinet. Use a clean dry cloth.
14.Nonuse periods — The power cord of the appliance should be unplugged
from the outlet when left unused for a long period of time.
15.Damage requiring service — The appliance should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally by following the
instruction manual. Adjust only those controls that are covered by the
instruction manual as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the appliance to its normal operation.
E. The appliance has been dropped, or the enclosure damaged.
F. The appliance exhibits a marked change in performance.
16. Servicing — The user should not attempt to service the appliance beyond
that described in the instruction manual. All other servicing should be
referred to qualified service personnel.
17. CAUTION — TO PREVENT ELECTRIC SHOCK DO NOT USE THE AC PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Advertisement
