Setting Up The 10-Key Remote And Keyboard; 10-Key Remote; Keyboard - Kenwood CD-4260M Instruction Manual

Setting Up the 10-key Remote and Keyboard

10-key Remote

To load Batteries
1 Remove the cover.
The 10-key remote operates in the following range:
Infrared Remote Sensor
TIMER PLAY
OFF ON
STANDBY
POWER
ON/STANDBY
Infrared Remote
transmitter

Keyboard

To load Batteries
1 Remove the cover.
The keyboard operates in the following range:
Infrared Remote Sensor
TIMER PLAY
OFF ON
STANDBY
POWER
ON/STANDBY
Infrared Remote
keyboard
2 Insert two AA batteries.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
o PUSH OPEN
)
^
DISC SKIP
DISPLAY CONFIRM
&
RANDOM REPEAT
6 m (20 ft.)
$ ›
30 30
CONFIRM POWER
A B C
BEST
SELECTION. REPEAT RANDOM DISPLAY
D E F G
1 2 3 4
H I J K
5 6 7 8
L M N O
9 0 +10 +100
P Q R S
– . /
'
T U V W
DISC
SELECTOR. ( ) MODE
X Y Z
DELETE SPACE CHARAC.
/CLEAR /CHECK /P.MODE SET
DISC SKIP
DOWN UP ENTER
7 6
CURSOR CHARACTER
LEFT RIGHT DOWN UP
1 ¡ 4 ¢
REMOTE CONTROL UNIT
RC-P0713
2 Insert two AA batteries.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
o PUSH OPEN
)
^
DISC SKIP
DISPLAY CONFIRM
&
RANDOM REPEAT 3 m (10 ft.)
$ ›
30 30
REMOTE CONTROL UNIT RC-KB2
3 Close the cover.
Remote Operating Range
If you use the remote outside of this range, the remote will not
operate correctly. As you use the remote, be aware of the following:
÷ The batteries that came with your new CD changer are intended to
be used for operation checks and setup. Therefore, they may not
last as long as ordinary batteries. Consider replacing them as soon
as you have verified that the remote operates correctly.
÷ When the remote's operating range gets shorter, replace both
batteries.
÷ Do not install the CD changer where direct sunlight or high-
frequency fluorescent lighting can shine directly into the remote
sensor. This can decrease the operating range of your remote.
÷ When pressing more than one remote control button successively,
press the buttons securely by leaving an interval of 1 second or
more between buttons.
3 Close the cover.
Keyboard Operating Range
If you use the remote outside of this range, the remote will not
operate correctly.
As you use the remote, be aware of the following:
÷ The batteries that came with your new CD changer are intended to
be used for operation checks and setup. Therefore, they may not
last as long as ordinary batteries. Consider replacing them as soon
as you have verified that the keyboard operates correctly.
÷ When the remote's operating range gets shorter, replace both
batteries.
÷ Do not install the CD changer where direct sunlight or high-fre-
quency fluorescent lighting can shine directly into the remote
sensor. This can decrease the operating range of your keyboard.
÷ When pressing more than one remote control button successively,
press the buttons securely by leaving an interval of 1 second or more
between buttons.
Connecting to Other Devices
9