In Regard To All Data Read Mode - Kenwood CD-4260M Instruction Manual

18
Disc replacement
Discs can be replaced with the same procedure as "Loading discs
in the carousel". In stopped condition, all discs can be exchanged.
However, when the disc door is opened while "DISC DETEC-
TION" is being displayed, it may not be possible to remove the
disc which had been played. Accordingly, wait for the "DISC
DETECTION" indication to go out before opening the disc door.
When the disc information has been read in at the time of regis-
tration of disc information like title, music type, etc., the disc
information can be recalled even when the disc insertion place
is changed.
4
Close the disc door.

In regard to ALL DATA READ mode

The disc information for all discs will be read. We recommend to
execute this mode before playback after discs have been exchanged.
Close the disc door before operation.
1 Press the MODE button.
2 Select "ALL DATA READ".
3 Set the input.
1. Please remove all CDs from the carousel before moving the unit.
2. If blinking "PLEASE WAIT" is displayed when the disc door is opened, do not attempt to change the disc.
Notes Notes
ª
MODE
DISC SKIP
DOWN UP
SET
÷ When a title has been registered and the disc door is closed, reading
operation is performed automatically.
The display flashes.
D I S C C D E
To display the title on a LCD remote control unit (provided with a
KENWOOD Receiver or optional), perform the all data read opera-
tion first, and operate the LCD remote control unit with the door left
closed. For the operation of the LCD remote control unit, refer to
the instruction manual provided with your receiver or LCD remote
control unit.
Each press switches the modes as follows:
1 MUSIC TYPE
2 USER FILE
3 DISC SEARCH
4 TITLE INPUT
5 ALL DATA READ
6 ALL INFORMATION
A L L D A T
Search in progress or
reading information The display flashes.
D D I S C C R
When the disc is CD-TEXT
D 0 0 1 : :
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the "D001:NO CD TEXT" display
will appear for approx. 3 seconds.
To quit ALL DATA READ mode
Press the 7 button.
Preparation
T E C T I ON 3
N
A R A E D 3
E A D I N G 3
C D A T E X T 3