Operation Of Remote - Kenwood DP-M5560 Instruction Manual

Operation of remote control unit (DP-M5560 only}
OPEN/CLOSE key
Disc selector key DISC SELECTOR keys
Plus-1 disc (P} (is)
P.MODE key
CLEAR key
Numeric keys (1 }-(01[ +10]
CHECK key vs (A101
TIME DISP. key Skip keys
REPEAT key Play/Pause key
RANDOW key Stop key ;
Search keys
ea 7 Spatial
Model: RC-P0702
Infrared control system
The operations of each are the same as those of the
keys in the unit.
M@ Loading batteries mM Operation procedure
a Remote control light sensor
Insert batteries.
Approx. 6 m
Bt
@ Insert two (RG/AA) size batteries as indicated by the polarity
marking.
if
2
a
oS
3
=|
=|
=|
oopoeg
OO, G00
") BODGOS
di
1
Close the cover.
e@ When two operation keys on the remote contral unit are pressed
successively, press each key secureiy reserving an interval of
more than 1 second for each press.
Notes:
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3, Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent iamp enters the remote control light sensor.
in such a case, change the system installation position to prevent the malfunction.
OP-MSS60 /De-Maged (Ent &