In Rule Name field, create a name for the rule. Note that this name should be unique,
for example Rule_1.
In Host (LAN) field, select Host_1.
In Target (WAN) field, select Target_1.
In Schedule field, select Schedule_1.
In Action field, select Allow.
In Status field, select Enable.
Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.11.2 Host
Choose menu "Access Restriction → Host", you can view and set a Host list in the screen as
shown in Figure 4-52. The host list is necessary for the Access Control Rule.
Host Description - Here displays the description of the host and this description is unique.
Information - Here displays the information about the host. It can be IP or MAC.
iB-W4GX150N
Figure 4-52 Host Settings
-73-
4G Wireless-N Router