Operate And Display Of Remote Control - Panasonic CS-RE9PKE-3 Service Manual

10.3 Operate and Display of Remote Control

10.3.1 Original setting
10.3.2 Mode selecting button
UTO, HEAT, COOL, DRY can be selected by pressing "MODE" button. Initial display of LCD is as follow
A
*Keeping the button depressed continuously, the operation mode will change in the following order in turn
AUTO—HEAT—COOL—DRY--AUTO
10.3.3 Temperature adjusting button
Temperature adjusting range is between 16 ℃~30 ℃
10.3.4 FAN SPEED button
There are 5 speed levels can be selected. The display on the remote controller changes as follows by pressing the
FAN SPEED button.
10.3.5 AIR SWING button
To adjust vertical airflow directions by pressing AIR SWING button (5 options)
10.3.6 QUIET AND POWERFULL button
Start Quiet operation: Press QUIET button on remote control and then QUIET displays on remote control display.
QUIET indicator on indoor unit lights up to identify Quiet mode has been activated.
Start Powerful operation: Press POWERFUL button on remote control and then POWERUL displays on remote
control display. POWERFUL indicator on indoor unit lights up to indentify Powerful mode has been activated.
Switch Quiet/Powerful operation to normal operation: Press QUIET button or POWERFUL button on remote
control and then QUIET or POWERFUL disappear on remote control display, QUIET or POWERFUL indicator blacks
out, which identifies the unit returns to normal operation.
Note: QUIET and POWERFUL operation can not be active simultaneously.
23