Troubleshooting - Kenwood KNA-DV2200 Instruction Manual

Dvd navigation system
Hide thumbs Also See for KNA-DV2200:
Table of Contents

Advertisement

Troubleshooting

See the table below to confirm whether any problem is due to a minor
operational error or a malfunction.
A problem might be due to a minor operational error rather than a malfunction.
Check the table below before contacting your local dealer for any repair service.
Problem
The power does not
come on.
The map does not scroll
even when the vehicle is
moving.
The vehicle marker does
not appear.
The GPS marker is not
displayed.
There is no voice
guidance.
Small spots or bright
flashes appear in the
screen displayed.
The map disc cannot be
ejected.
48
General problems on the navigation system
Possible cause
The fuse might be
blown.
The screen shown might
not be the Current
Position screen.
The screen shown might
not be the Current
Position screen.
The GPS antenna or your
vehicle might be in a
position where GPS
signals cannot be
received.
Route guidance might be
suspended.
The guidance volume
might be turned down
low.
This is probably due to
the nature of the LCD
display.
The disc might be
incompatible or might
have been inserted
incorrectly.
Probable solution
Check the fuse. Replace it
if it is blown.
See page 13 of this
manual to display the
Current Position screen.
See page 13 of this
manual to display the
Current Position screen.
Try moving the GPS
antenna or your vehicle to
a position where there are
no obstacles around.
The route guidance is off,
see Route Options (page
25).
See User Settings (page
41).
There is nothing wrong
with the display and no
need for concern.
Restart the engine and see
page 4 of this manual.

Advertisement

Table of Contents
loading

Table of Contents