HP DesignJet 230 Service Manual page 2

For HP Internal Use Warranty
Only
The information contained
E Copyright Hewlett in this document is subject
Packard Company 1996 to change without notice.
This document contains Hewlett Packard makes
proprietary information no warranty of any kind
that is protected by with regard to this
copyright. All rights are material, including, but
reserved. No part of this not limited to, the
document may be implied warranties of
photocopied, reproduced, merchantability and
or translated into another fitness for a particular
language without the prior purpose.
written consent of Hewlett
Packard Company. Hewlett Packard shall not
be liable for errors
HP internal order number contained herein or for
C4699 90000 incidental or consequential
damages in connection
Second edition, March
with the furnishing,
1996
performance, or use of this
Printed in U.S.A.
material.
Learning Products, Barcelona Division
Hewlett Packard Española, S.A.
Avda. Graells, 501
08190 Sant Cugat del Vallès
Spain
WARNING
The procedures described
in this manual are to be
performed by HP qualified
service personnel only.
Electrical Shock
Hazard
Serious shock hazard
leading to death or injury
may result if you do not
take the following
precautions:
D Ensure that the ac power
outlet (mains) has a
protective earth (ground)
terminal.
D Disconnect the plotter
from the power source
prior to performing any
maintenance.
D Prevent water or other
liquids from running
onto electrical
components or circuits,
or through openings in
the enclosure.
Electrostatic Discharge
Refer to the beginning of
Chapter 6 of this manual,
for precautions you should
take to prevent damage to
the plotter circuits from
electrostatic discharge.
Safety Symbols
General definitions of
safety symbols are given
immediately after the table
of contents.