Diagnostic Information; Start; Power-On Self Test (Post) Sequence - Lexmark X83 Service Manual

4403-XXX

2. Diagnostic Information

Start

Use the symptom tables, service checks, and diagnostic aids in
chapter three, to determine the printer failure.

Power-On Self Test (POST) Sequence

Press the power button to turn machine on.
•
The Photo, Normal, and Quick indicator lights turn on.
•
The Charge Couple Device (CCD) moves to the left, then
returns to the right.
•
The paper feed motor runs then stops.
•
The carrier moves to the left then returns to the right stopping at
the maintenance station.
•
The Photo and Quick lights turn off.
•
Normal light stays on.
•
The message below is displayed on the LCD.
If your printer completes POST with no errors, go to the
Tables" on page
action.
If your printer does not complete POST, locate the symptom in the
following table and take the indicated action.
2-3, locate the symptom and take the indicated
"Symptom
Diagnostic Information
2-1