Dvd Setup; Dvd Language Setup - Kenwood DNX9140 Instruction Manual

Setup Menu
DVD Setup
You can set up the DVD play.
D
Display the DVD Setup screen
Touch
[.J >
[~J
>
[DVD SETUP]. (page 66)
II
Set each item
[Menu Language] Selects a disc menu
language.*1
(See <DVD Language Setup>, page 84)
[Subtitle Language] Selects a subtitle
language.*1
(See <DVD Language Setup>, page 84)
[Audio Language] Selects an audio
language.*1
(See <DVD Language Setup>, page 84)
[Dynamic Range Control] Sets the dynamic
range.*1
n2J
"Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
n;!"ON")
[Screen Ratio] Selects the screen display
d
*1 (I~
"169")
mo e. ,__
J :
"16:9":
Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at the
top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
84 DNX9140/DDX814/DDX8034BT
Scan format (showing pictures cut at
the right and left ends).
[Parental Level] Displays the Parental Lock
screen.*1
([2\
"OFF")
(See <DVD Parental Level Setup>, page 85)
[Disc SETUP] Makes the settings related to the
disc media. (See <Disc Setup>, page 86)
Go.
~
. *1
Disabled when a DVD is being played.
DVD Language Setup
Selects a language you use for the speech and
menus.
D
Display the DVD Setup screen
Touch [ . ]
>
[~]
>
[DVD SETUP]. (page 66)
II
Select the language item to set
D
Enter a language code
See <DVD Language Codes> (page
99)
and
select the desired language.
[I]
Enters a language code.
[Cancel] Cancels the language setup and
returns to the "DVD SETUP" screen.
[Enter] Sets the language and returns to the
"DVD SETUP" screen. (It appears after you have
entered a language code.)
[Original] Sets the DVD's original language
(only when setting an audio language).
[Clear] Clears the language code.
D
Set the language you use