Audio Control; Audio Control Menu - Kenwood DDX6034M Instruction Manual

Audio Control

Audio Control Menu

Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the Source Select Screen
2 Display the Audio Control menu
In this manual, the above selection is indicated
as:
>
Touch [ ] [ ].
3 Select the Audio Control item
Item
[Audio Control]
[Equalizer]
[Tone]
[EQ]
[Zone Control]
[Space Enhancer]
[Position]
Audio Control
You can adjust the front/rear and right/left audio
balance.
1
SRC
2
Page
53
54
55
54
55
56
56
Display the Audio Control screen
> >
Touch [ ] [ ] [Audio Control]. (page 53)
Set each item
1 1 1
DDX6 models
1 Adjusts the front/back and left/right volume
around the touched area.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
⁄
• If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Loudness] Turns the Loudness control
function On or Off. (DDX6 models only)
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable only when zone function is set to Off.
See <Zone Control> (page 55).
Next page 3
English 53