Search By Program Type (Region 2/ 3 Models); Frequency Step Setting (Region 4/ 6 Models) - Kenwood DDX6034M Instruction Manual

Search by Program Type
(Region 2/ 3 models)
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1 Display the Source
See <Source Control Screen> (page 31).
2 Enter Program Type Search mode
3 Select a Program Type
1 1 1
1 Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
4 Search a station of the selected Program
Type
Control Screen
Frequency Step Setting
(Region 4/ 6 models)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1 Switch the frequency step
While pressing [NAV] (DNX models)/ [TOP] (DDX
models) button and [0] button, press the Reset
button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.
English 35