Other Functions; How To Use The Character Entry Screen; External Device Power Supply Control (Dnx/ Ddx7 Models) - Kenwood DDX6034M Instruction Manual

Other Functions

How To Use the Character Entry Screen

Character Entry screen
1 Enters characters.
[2], [3] Shifts the cursor.
[5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
[Clear] Clears the character.
If you erase a character, locate the cursor on it
and touch this button.
[Space] Enters a space.
⁄
• You can enter characters only after you have applied the
parking brake.
1 1 1
External Device Power Supply Control
(DNX/ DDX7 models)
Controlling the external device power supply.
1 Display the Source Select Screen
See <How to Select the Source> (page 12).
2 Display the EXT SW Control screen
3 Control the external device power supply
You can turn on or off the external device power
supply.
⁄
• You must connect a commercially available relay unit in
order to use this function.
Connect the external device to be controlled to that
relay unit.
• Refer to <EXT SW Setup> (page 63) for information on
setting the power on or off specification.
English 41