: . Using The. Remote; Changing Button Assignments - Sony STR-DG720 Operating Instructions Manual

'"
.
: . Using the. Remote
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the VIDEO 1jacks on the receiver,
you can set the VIDEO I button on this remote
to control the DVD recorder.
1
Hold down the input button of
which you want to change the
assignment.
Example: Hold down VIDEO 1.
2
Referring to the table below,
press the corresponding
button for the category you
want.
Example: Press 4.
Now you can use the VIDEO 1 button to
control the DVD recorder.
Categories and the
corresponding buttons
Categories Press
VCR (command mode VTR 3)a) I
VCR (command mode VTR 2)a) 2
DVD player/DVD recorder 3
(command mode DVDI)b)
DVD recorder 4
(command mode DVD3)b)
CD player 5
Euro Digital Satellite Receiver 6
DVR (Digital CATV terminal) 7
DSS (Digital Satellite Receiver) 8
Blu-ray disc player 9
(command mode BD1)c)
Blu-ray disc recorder 0/10
(command mode BD3)C)
TV
.1>101
CLEAR
Not assigned ENTER!
MEMORY
a) Sony VCRs are operated with a VTR 2 or VTR 3
setting which corresponds to 8 mm and VHS
respectively.
b)Sony DVD recorders are operated with a DVD I or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
c)For details on the BD I or BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
To clear all remote button
assignments
Press I/~, DMPORT and MASTER VOL - at
the same time.
The remote is reset to its factory settings.
81
US
-
c:
rn
::s
to
-
' :j
CI)
JJ
CI)
3
o
-
C I)