torcycle stand is not available, by plac-
ing a jack either under each side of the
frame in front of the rear wheel or un-
der each side of the swingarm.
PERIODIC MAINTENANCE AND ADJUSTMENT
Front wheel
To remove the front wheel
WARNING
To avoid injury, securely support
the vehicle so there is no danger of
it falling over.
1. Loosen the front wheel axle and
the brake caliper bolts.
1. Axle nut
2. Lift the front wheel off the ground
according to the procedure on
page 7-31.
3. Remove the speed sensor lead
holder by removing the bolt.
7-32
EAU24360
EAUE0470
EWA10821
1. Speed sensor cable
4. Remove the brake hose holder by
removing the bolt.
5. Remove the brake caliper by re-
moving the bolts.
1. Brake hose holder
2. Brake caliper bolt
3. Brake caliper
4. Axle bolt
7