Denon AVR-3805 Operating Instructions Manual page 28

ENGLISH
5-5 Setting the Muting Level
• This sets the amount of attenuation at audio output muting.
1
Select "Muting Level" at the Option Setup
Menu.
CH SEL CH SEL
ENTER
ENTER
(Remote control (Main unit)
unit)
2
Display the Muting Level screen.
CH SEL CH SEL
ENTER ENTER
(Remote control (Main unit)
unit)
3
Select the desired setting.
CH SEL
CH SEL
ENTER ENTER
(Remote control (Main unit)
• –20 dB: It is turned down the volume to
unit)
• –40 dB: It is turned down the volume to
4
Enter the setting.
CH SEL CH SEL
The Option Setup Menu reappears.
ENTER ENTER
(Remote control (Main unit)
unit)
28
* O p t i o n S e t u p
M u t i n g L e v e l
* M u t i n g L e v e l
- - - d B
–20 dB from the present level.
–40 dB from the present level.
5-6 Setting the On Screen Display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
• Sets the on-screen display's display mode.
Mode 1: Prevents flickering of the on-screen display when there is no video signal.
Mode 2: Flickering is not prevented.
Use this mode if the on-screen display does not appear in the mode 1, as may happen according
to the TV being used.
1
Select "On Screen Display" at the Option
Setup Menu.
CH SEL
CH SEL
ENTER
ENTER
* O p t i o n
(Remote control (Main unit)
O n S c r e e n
unit)
2
Display the On screen display setup screen.
CH SEL CH SEL
ENTER
ENTER
(Remote control (Main unit)
unit)
3
Select "ON" or "OFF".
CH SEL
CH SEL
ENTER ENTER
* O n S c r e e n
(Remote control (Main unit)
O N / O F F :
unit)
4
q Select the On Screen Display w Select "Mode1" or "Mode2".
mode.
CH SEL
CH SEL
ENTER
ENTER
(Remote control (Main unit) (Remote control
unit)
5
Enter the setting.
CH SEL CH SEL
The Option Setup Menu reappears.
ENTER ENTER
(Remote control (Main unit)
unit)
S e t u p
O N
CH SEL CH SEL
ENTER
ENTER
(Main unit)
unit)
* O n S c r e e n
M o d e : M o d e 1