Denon AVR-3805 Operating Instructions Manual page 12

ENGLISH
2. Speaker Setup
Speaker Setup
Input the combination of speakers in your
system and their corresponding sizes (SMALL for
Speaker regular speakers, LARGE for full-size, full-range) to
1
Configuration automatically set the composition of the signals
output from the speakers and the frequency
response.
This parameter is for optimizing the timing with
which the audio signals are produced from the
2
Delay Time
speakers and subwoofer according to the listening
position.
This adjusts the volume of the signals output from
Channel
3
the speakers and subwoofer for the different
Level
channels in order to obtain optimum effects.
Set the frequency (Hz) below which the bass so of
Crossover
4
the various speaker is to be output from the
Frequency
subwoofer.
Subwoofer This selects the subwoofer speaker for playing
5
mode deep bass signals.
Use this function when using multiple
surround speaker combinations for
more ideal surround sound. Once the
(Surround
combinations of surround speakers to
6
Speaker
be used for the different surround
Setting)
modes are preset, the surround
speakers are selected automatically
according to the surround mode.
3. Input Setup
Input Setup
Digital In This assigns the digital input jacks for the
1
Assignment different input sources.
Ext. In
Set the Ext. In Subwoofer terminal playback
2
Subwoofer
level.
Level
Component This assigns the color difference (component)
3
In Assign video input jacks for the different input sources.
Video Input Set the input signal to be output from the monitor
4
Mode output terminal.
Auto Tuner FM stations are received automatically and stored
5
Presets in the memory.
12
Default settings
Surround Sp.
Front Sp. Center Sp. Subwoofer
A / B
Large Small Yes Small
Front L & R Center Subwoofer Surround L & R
3.6 m (12 ft) 3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)
Surround Surround Surround
Front R Center
Front L
L R Back L
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
80Hz
LFE
DOLBY/ DOLBY/ DOLBY/
Surround
WIDE 5CH/7CH
DTS DTS PL IIx
mode SCREEN STEREO SIMULATION
CINEMA MUSIC GAME
Surround
A A A A A
speaker
Default settings
Input
CD DVD VDP TV DBS V. AUX VCR-1
source
Digital
COAX1 COAX2 OPT1 OFF OPT2 OPT5 OPT3
Inputs
Subwoofer = +15 dB
VDP TV DBS VCR-1 VCR-2
DVD
VIDEO VIDEO VIDEO
NONE NONE NONE
1 2 3
AUTO
A1 ~ A8 87.5/89.1/98.1/108.0/90.1/90.1/90.1/90.1 MHz
B1 ~ B8
522/603/999/1404/1611 kHz, 90.1/90.1/90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
4. Advanced Playback
Advanced Playback
Set the audio delay to delay time the sound and
Surround Back
1
Audio Delay
synchronize it with the picture.
Sp.
Dolby Digital Turn the audio compression on or off when down-
Small / 2spkrs 2
Setup mixing Dolby Digital signals.
Auto
SBL & SBR
3
Surround Set the Auto surround mode function.
Mode
3.0 m (10 ft)
Surround
Subwoofer
Back R 5. Option Setup
0 dB 0 dB
Option Setup
Power AMP Set this to switch the surround back channel's
1
Assignment power amplifier for use for zone2 or zone3.
This sets the output level the zone2 output jacks.
Zone2 vol.
2
This menu is not displayed, when "ZONE2" is
Level
selected at Option Setup "Power Amp Assign".
MULTI
DSP
CH EXT.IN
MODE Trigger Out1 Set the Trigger Out1 output for the each input
3
Setup sources.
A A A
Trigger Out2 Set the Trigger Out2 output for the each input
4
Setup sources.
CDR/
VCR-2
This sets the amount of attenuation at audio
TAPE 5
Muting Level
output muting.
OFF OPT4
This sets whether or not to display the on-screen
display that appears on the monitor screen when
On Screen
6
the controls on the remote control unit or main unit
Display
are operated.
A setting to prevent flickering.
V. AUX
— —
Set whether or not to lock the system setup
7
Setup Lock
settings so that they cannot be changed.
NONE
— —
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback
of a video component. For example, if the TV monitor is connected to both the AVR-3805's S-Video and
video monitor output jacks and signals are input to the AVR-3805 from a video source (VDP, etc.) connected
to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-
Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a
cord to the S-VIDEO MONITOR OUT jack. (For details, see page 29.)
• The AVR-3805's on-screen display function is designed for use with high resolution monitor TVs, so it may
be difficult to read small characters on TVs with small screens or low resolutions.
• The setup menu is not displayed when headphone are being used.
Default settings
0 ms
OFF
Auto Surround Mode = ON
Default settings
Surround Back
Variable
ZONE=MAIN
CDR/
CD TUNER DVD VDP TV DBS VCR-1 VCR-2
PHONO
TAPE
OFF OFF OFF OFF ON ON ON ON ON ON
ZONE=2
CDR/
PHONO CD TUNER DVD VDP TV DBS VCR-1 VCR-2
TAPE
ON ON ON ON ON ON ON ON ON ON
---dB (minimum)
On Screen Display = ON / Mode 1
Setup Lock = OFF
V. AUX
ON
V. AUX
ON