Configure Destination Phone Number Manipulation - AudioCodes Mediant 800 Configuration Manual

5.9.1

Configure Destination Phone Number Manipulation

This section describes how to configure the destination phone number manipulation.
To
Calls Table:
Open the 'Destination Phone Number Manipulation Table for IP -> Tel calls' page
(Configuration tab > VoIP menu > GW and IP to IP > Manipulations submenu
> Dest Number IP >Tel).
Figure 5-23: Destination Phone Number Manipulation Table for IP -> Tel Calls Page
•
•
•
•
To configure Destination Phone Number Manipulation Table for Tel -> IP
Calls Table:
1. Open the 'Destination Phone Number Manipulation Table for Tel -> IP calls' page
(Configuration tab > VoIP menu > GW and IP to IP > Manipulations submenu
> Dest Number Tel->IP).
PAETEC and Microsoft Lync Integration
configure Destination Phone Number Manipulation Table for IP -> Tel
Index #1 defines destination number manipulation of IP calls from Lync
2010 Mediation Server. All calls received from IP address 10.15.9.11 (i.e.,
from Mediation Server) and the destination number prefix begins with '+1',
Remove the '+1' from the Number, and add the prefix '1'.
Index #2 defines destination number manipulation of IP calls from Lync
2010 Mediation Server. All calls received from IP address 10.15.9.11 (i.e.,
from Mediation Server) and the destination number prefix begins with '+0',
Remove the '+' from the Number.
Index #3 defines destination number manipulation of IP calls from Lync
2010 Mediation Server. All calls received from IP address 10.15.9.11 (i.e.,
from Mediation Server) and the destination number prefix begins with '+',
Remove the '+' from the Number, and add the prefix '1'.
Index #4 defines destination number manipulation of IP calls from Lync
2010 Mediation Server. All calls received from IP address 10.15.9.11 (i.e.,
from Mediation Server) and the destination number prefix begins with '1',
Remove the '1' from the Number, and add the prefix '1'.
Mediant 800/1000/3000 E-SBC
58 Document #: LTRT-33420