Accessories; Installation - Kenwood KDV-S220P Instruction Manual

Accessories

1
2
3
4
5
6
7
• If the fuse blows, first make sure that the wires have not
caused a short circuit, then replace the old fuse with one
with the same rating.
22
|
English

Installation

Installation using the Brackets
..........1
..........1
Installation using the velcro tapes
..........2
..........4
..........4
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• Do not install the unit to an unatable place and a place
where it vibrates.
• You can mount the unit at any angle between the
..........2
regular horizontal position and the vertical position on
its back (0° through 90°). You cannot mount the unit with
the disc slot facing downwards, angled or upside down.
..........1
Tapping Screw 5
Bracket 3
Carpet
Semusu Screw 4
Velcro tape 6