Speaker Setting - Kenwood DV-6050 Instruction Manual

"Speaker Setting"

This unit has two kinds of speaker setting methods.
"Speaker Setting (Custom)"
This is the normal setting operation.
"Speaker Setting (Quick)" W
This is the simplified setting operation.
"Speaker Setting (Custom)"
At the factory, the player has been set to the standard
setting with which the speakers can reproduce the 6-
channel signals as soon as the connections are made.
This setting can be changed according to each listening
environment. When you want to change this setting, be
sure to perform it in the listening area in your own
listening environment.
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up/down button to display
the "SOUND" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
3.
Press the cursor up/down button to select "Speaker
Setting (Custom)" in set up menu "SOUND", then
press the ENTER button.
Speaker Setting (Custom)
Test
Exit
L C R
LS SW RS
C
0 dB 0 dB
10 ft 10 ft
L
0 dB
SW
LS
0 dB 5 ft
50
Table : "Speaker Setting (Custom)" Function & Setting (1/2)
Speaker Item
Icon
L, R Front speaker
C Center speaker
LS, RS Surround speaker
0 dB
10 ft
R
RS
0 dB
Function Item
Speaker Icon Function
Size Low cut filter
Level Set the volume level
E
Distance
Center channel output
ON/OFF
Size
Low cut filter
Level Set the volume level
E
Distance
Surround channel output
Size
ON/OFF
Low cut filter
Level Set the volume level
E
Distance
Chapter 6: Various Setups
Setting Item
Icon Means
Select "Normal" when the
connected speaker is incapable of
Normal
reproducing audio below 100 Hz.
Select "Large" when the
connected speaker can
Large
reproduce audio below 100 Hz.
0 to -12 dB – –
0/10/20/30 – –
Select "Off" if the center speaker
is not used.
Off
Select "Normal" when the
Normal
connected speaker is incapable of
reproducing audio below 100 Hz.
Select "Large" when the
Large
connected speaker can
reproduce audio below 100 Hz.
0 to -12 dB – –
0/10/20/30 – –
Select "Off" if the surround
speaker is not used.
Off
Select "Normal" when the
Normal
connected speaker is incapable of
reproducing audio below 100 Hz.
Select "Large" when the
Large
connected speaker can
reproduce audio below 100 Hz.
0 to -12 dB – –
0/10/20/30 – –
Initial
Position
Large
0 dB
10 ft
Large
0 dB
10 ft
Large
0 dB
5 ft