Sound" Setting; When "Sound" Is Selected In "Set Up Menu - Kenwood DV-6050 Instruction Manual

"SOUND" Setting

When "SOUND" is selected in "SET UP
MENU":
"SOUND" is to be selected when you want to set the
audio output method when system components are
connected using the digital audio output connector of
the player.
When the system is connected using the 6CH. OUTPUT
jacks of the player, also select "SOUND" to set the
speakers, audio output during DVD or VCD search,
dynamic range control function and audio filters.
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up/down button to display
the "SOUND" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
SOUND
Digital Audio
PCM Down Conversion On
7
Dolby Digital 7 Bitstream
7 Bitstream
DTS
MPEG 7 Bitstream
MENU
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
7 On
Dynamic Range Control 7 Normal
Audio Filter 7 Filter 60kHz
3.
In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up/down button
and press the ENTER button.
4.
Select the Setting Item (refer to Right Table) by
pressing the cursor up/down button, then press the
ENTER button to enter the selection in memory.
¶ "
" : Select to return to the previous screen.
48
Table : SET UP MENU "SOUND" Function & Setting (1/2)
Function Item
Icon
Digital Audio Switches on/off the down-
"PCM Down sampling conversion for the
Conversion" digital signal output with a high
sampling rate.
Digital Audio Sets the Dolby Digital output.
"Dolby Digital"
Digital Audio Sets the DTS output.
"DTS"
Digital Audio Sets the MPEG output.
"MPEG"
EXIT
Speaker Setting
(Custom)
Speaker Setting
(Quick)
Function Icon
On
Off
÷ With DVD AUDIO discs, the
signal is always output after
down sampling conversion.
Bitstream
PCM
Bitstream
PCM
Bitstream
PCM
p
W
Chapter 6: Various Setups
Setting Item
Means
Down-convert the signal to 44.1 kHz/48 kHz/16-
bit PCM signal.
The analog output signals are converted
accordingly.
Skip down conversion.
÷ If the disc inhibits the 96 kHz digital output,
the signal is down-converted even when this
setting is selected.
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream signal.
48 kHz (2CH.) PCM signal.
Initial
Position
On
Bitstream
Bitstream
Bitstream