Table of Contents
Advertisement
"Digital Audio MPEG" Setting
When a DVD recorded in MPEG Audio is played, this
setting makes it possible to select the audio signal
output from the digital output connector.
At the factory, the player has been set to "Bitstream"
to enable digital connection to an AV amplifier with
built-in MPEG decoder. Change the setting to "PCM"
when the digitally connected amplifier does not
incorporate the decoder.
Setting items
"
" : Select to return to the previous screen.
"Bitstream" : The signal is output as a bitstream.
Select when connecting a component containing
MPEG decoder.
"PCM" : The signal is converted onto 48 kHz (2CH)
PCM signal before being output. Select when
connecting a component without MPEG
decoder.
28
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
tilt the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press
to open the setup screen.
ENTER
4.
In the setup menu, select "Digital Audio MPEG"
by tilting the joystick up or down and press
Digital Audio
7
PCM Down Conversion
7
Bitstream
Dolby Digital
7
PCM
DTS
MPEG
Speaker Setting
Audio During Search
Dynamic Range Control
Audio Filter
5.
Select the audio output by tilting the joystick up or
down, and press
to enter the selection in
ENTER
memory.
"Speaker Setting"
When an associated system component is connected
to the 6CH. OUTPUT jacks of the player, this setting
is required on the player.
At the factory, the player has been set to the standard
setting with which the speakers can reproduce the 6-
1
and
SET UP
channel signals as soon as the connections are made.
This setting can be changed according to each listening
environment. When you want to change this setting,
be sure to perform it in the listening area in your own
listening environment.
¶ For the "Speaker Setting" when an AV amplifier
is connected digitally to the player, refer to the
instruction manual of the AV amplifier.
.
ENTER
Front speakers (L, R)
Size: "Large"
Center speaker (C)
Size: "Large"
Use of center speaker: Used
Level: "0 dB"
Delay time: "0 ms"
Surround speakers (LS, RS)
Size: "Large"
Use of surround speakers: Used
Level: "0 dB"
Delay time: "0 ms"
Subwoofer
Use of subwoofer: Used
Level: "0 dB"
Chapter 2: Various Setups
Advertisement
Table of Contents
