Cleaning The Pinch And Feed Rollers - Monarch Pathfinder 6039 Quick Start Manual

5. Clean the printhead area of all adhesive and label
particles using a Monarch Cleaning Pen (#114226) or a
soft cloth moistened with isopropyl alcohol. Allow the
printer to dry before reloading supplies.

Cleaning the Pinch and Feed Rollers

1. Turn off the printer and open the supply cover.
2. Remove the supplies.
3. Turn the platen roller with your fingers and run a dry,
lint-free cloth across the pinch and feed rollers as they
turn. Make sure the rollers are clean all the way
around. If that does not work, use a cloth dampened
slightly with distilled water.
4. Clean any adhesive buildup you see as the rollers turn.
5. Reload the supplies after the printer dries.
Cleaning the Black Mark
Sensor
1. Turn off the printer and
open the supply cover.
2. Remove the supplies
3. Clean the black mark sensor with a dry cotton swab.
4. Reload the supplies and close the supply cover.
Cleaning the On-Demand Sensor
1. Turn off the printer and open the supply cover.
2. Remove the supplies.
3. Open the label deflector.
4. Clean the on-demand
sensor with a soft cloth
moistened with distilled
water.
5. Reload the supplies
and close the label deflector and supply cover.
8
Black
Mark
Sensor
On-
Demand
Sensor