Loading For Non-Peel Mode - Monarch Pathfinder 6039 Quick Start Manual

6. Place a roll of supply in the
supply holder so it unrolls from
the bottom.
7. Load the supplies for the printing
mode you want: Peel or Non-
Peel.

Loading for Non-Peel Mode

1. Feed the supply under the
applicator roller and over the label deflector.
2. Close the supply cover.
3. Select Load Supply from the printer icon menu, choose
your supply type, and then select Calibrate.
Loading for Peel Mode
1. Peel and discard the first
four inches of labels from
the backing paper.
2. Hold the printer upright and
gently press down on the
label deflector. It may be
stiff.
3. Feed all four inches of the backing paper over the peel
bar and under the applicator roller and the label
deflector.
4. Push the label deflector up until it snaps into place.
5. Partially close the cover to the first position.
4
Ap plicator Roller
Label
Deflector
Ap plicator Roller
Peel Bar
Label
Deflector