Error Codes - Monarch Pathfinder 6039 Quick Start Manual

Error Codes

Following are some common error codes you may receive.
See your System Administrator if you receive any codes
not listed here.
Code(s)
004 – 005
267 – 271
410 – 413
703 – 704
750
751 – 753
756
757
758
762
763
768
790 – 791
904 – 911
SYSTEM
ERROR
VECTOR ##
12
Description
Supply size is incorrect. Reload the
correct supplies.
Communication error. See your System
Administrator.
Load supplies or make sure they are
loaded correctly.
Printhead is overheated. Turn off the
printer to let it cool.
Check the supplies to see if they are
loaded correctly.
The printer is out of supplies.
Load supplies.
The calibrated supply length differs by
plus or minus .25 inches from the format.
Load supplies.
Check supply. Either the supply is not
seen, or the on-demand sensor is broken
(purchase optional). Check for a label
jam. Clear the supply path or reload
supplies.
The printer does not recalibrate after this
error.
Low battery. Recharge the battery.
Waiting to dispense label. Press Enter.
Printhead error. See your System
Administrator.
Turn off the printer. Wait two seconds
and turn it back on.
System error. See your System
Administrator.
System error. See your System
Administrator.