Toyota 2009 Tacoma User Manual page 113

1-7. Safety information
Removing a child restraint installed with a seat belt
Installation with child restraint lower anchors (Access Cab models)
n Installing on the front seat
114
Sit the child in the booster seat.
Fit the seat belt to the booster
seat according to the manufac-
turer's instructions and insert the
plate into the buckle. Make sure
that the belt is not twisted.
Check that the shoulder belt is
correctly positioned
child's shoulder, and that the lap
belt is as low as possible.
(→P. 56)
Push the buckle release button
and fully retract the seat belt.
Fold down the front seat seat-
back and back to the 1st lock
position (most upright position)
until it locks into place. Adjust the
seatback to the 10th lock posi-
tion.
1st lock position
10th lock position
over the