Toyota 2009 Tacoma User Manual page 184

Hide thumbs Also See for 2009 Tacoma:
Table of Contents

Advertisement

2-4. Using other driving systems
Turning off TRAC and VSC
n
Automatic reactivation of TRAC and VSC
n
Turning the engine switch off after turning off the TRAC and VSC systems
will automatically re-enable them.
Automatic TRAC reactivation (AUTO LSD mode)
n
With AUTO LSD mode, VSC OFF and AUTO LSD indicator lights turn on.
The TRAC system will turn on when the vehicle speed increases.
Automatic TRAC and VSC reactivation
n
If the TRAC and VSC systems are turned off, the systems will not turn on
even when vehicle speed increases.
n
Sounds and vibrations caused by the ABS, TRAC, VSC, brake assist
and hill-start assist control system
A sound may be heard from the engine compartment when the engine is
l
started or just after the vehicle begins to move. This sound does not indi-
cate that a malfunction has occurred in any of these systems.
l
Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly when the ABS is activated.
• The brake pedal may move down slightly after the ABS is activated.
186
Push and hold the button for
more than 3 seconds while the
vehicle is stopped to turn off both
TRAC and VSC.
The VSC OFF indicator light
should come on.
Push the button again to turn both
systems back on.

Advertisement

Table of Contents
loading

Table of Contents