Phone Configuration - Grandstream Networks GXP1400 Quick Start Manual

Hide thumbs Also See for GXP1400:

Table of Contents

Available languages

Enlarged version

Tips For Using the Keypad:

1. To access the MENU, press the round MENU button.

2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.

3. Press the round MENU button to confirm a menu selection.

4. The phone automatically exits MENU mode when there is an incoming call, the

phone goes off-hook, or when the MENU mode is left idle for 20 seconds.

PHONE CONFIGURATION:

Configure the GXP1400/1405 Using Web Browser:

Ensure your phone is powered up and connected to the Internet.

2. Press MENU button to go into menu of the phone.

3. Press the 'down" arrow button to "Status" and press MENU button to check the

IP address.

4. Type the phone's IP address in your PC browser. (See figure on the right)

5. The default administrator password is "admin"; the default end-user password

is "123".

Configure the GXP1400/1405 using the Keypad:

1. Make sure the phone is idle.

2. Press the "MENU" button to access the menu options to configure the phone.

3. Select MENU->Config, to configure settings for SIP Proxy, Outbound Proxy, SIP

User ID, SIP Auth ID, SIP Password.

4. Follow MENU options to configure the basic features of the phone – for ex-

ample: the IP address if using a static IP. For details, please check GXP1400/1405

User Manual.

5. Please contact your ITSP (Internet Telephony Service Provider) for additional

settings that may be necessary to configure the phone.

Note: For the detailed user manual, please download from:

http://www.v2vipvideophones.com/support

Table of Contents

Gxp1405