Download Print this page

Sharp Aquos UQ17U Operation Manual page 55

Advertisement

Example
• For operating the on-screen
display menu,
see uaae 4-3.
Power control setting allows you to save energy.
When listening to music from a music program, you can
turn the screen off and enjoy audio only.
• The screen image will return to norma! when a button
(except those for audio adjustment,
such as VOL,
MUTE) is pressed.
This function allows you to set the Power Saving level in
order to decrease
the power consumption
and increase the
backlight lifespan.
Standard:
Optimizes
power reduction
based upon video
content. When set to "Standard",
"2_" appears
on the
screen.
Advanced:
Optimizes
power reduction
based upon video
content and engages Light Sensor. When set to
"Advanced",
"_"
appears
on the screen.
Off: This function does not work.
• "Power Saving" does not function when you set AV
MODE to "AUTO" or "DYNAMIC (Fixed)".
• You cannot select a different
Power Saving item for each
AV MODE.
When "Power Saving" is set, the "Automatic
Light
Sensor" settings for all AV Modes will automatically
change.
- If you set "Automatic
Light Sensor" to "On" when
"Power Saving" is set to "Standard", then the "Power
Saving" setting will change to "Advanced".
- When you change the "Power Saving" setting from
"Advanced"
to "Off" or to "Standard",
"Automatic
Light
Sensor" will be set to "Off".
- "AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
• When "Power Saving" is set to "Standard"
or "Advanced",
the Power Saving leaf icon appears to the left of
"Automatic Light Sensor" in the Picture Settings
menu
screen.
• "Power Saving" is not available when the TV is in 3D
mode. (For the UQ17U, TQ15U, SQ17U, SQ15U and
LE657U models)
When this function is enabled, the TV automatically
shuts
down if no signal is received for more than 15 minutes.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing
every minute.
• When a TV program finishes, this function may not
operate.
When you enable this function, the TV automatically
shuts
down if no operation is performed for more than 3 hours.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing
every minute.
ENG 4-27

Advertisement

loading