Advertisement
Example
Reduces jaggies and noise and displays a clear picture.
Processes noise included in broadcast signals to improve
picture quality.
High:Improves
picture quality through Clear Picture
Processing
at a level above "Standard".
Middle:Improves
picture quality through Clear Picture
Processing.
Off:No
adjustment.
Color tone is managed using the six-color
adjustment
setting.
C.M.S.-Hue:
This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation:
Increases or decreases
the saturation
of a selected color.
C.M.S.-Value:
A higher value makes the image brighter.
A lower value makes the image darker.
• For resetting all adjustment
items to the factory preset
values, press _L!Y to select "Reset", and then press
ENTER.
For a better white balance, use color temperature
correction.
High:
White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low:
White with reddish tone
Low (Xenon},
Low (Carbon
arc}: Available only when AV
MODE is set to "VINTAGE
MOVIE" MODE. Use one of
these items to make picture color become more reddish.
White balance can be adjusted between a maximum of +30
and a minimum of -30 for each color temperature.
R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI}
Fine tuning the color temperature
To fine tune the color temperature,
set "10 Point Setting" to
"On".
You can adjust the "Position"
setting. Adjust the set color
temperature
from +1 to +10.
White balance can be adjusted between a maximum of +30
and a minimum of -30 for each color temperature.
• When "Position" is set to "10", you can adjust the white
balance between -30 and 0.
• For resetting all adjustment items to the factory preset
values, press _
to select "Reset", and then press
ENTER.
(F_ tP@UQ, TQ aa_ SO #'_de_s, }
ENG 4-8
Advertisement
