Advertisement
Example
Feature Demo: When "On" is selected, after all the
settings
are completed, the Feature Demo screen is
displayed
if there is no operation for several minutes.
• ENERGY STAR qualification
is based on AV MODE
"STANDARD
(ENERGY STAR)*1".
Antenna
& Cable/STB:
Select the type of connection you
will use to watch TV.
Air/Cable:
Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search:
Channel auto search makes the TM look for
all channels viewable in the set area.
• If "Cable" is selected for Antenna setting, scrambled
channels are removed after the Channel search has
been completed.
Smart TV: When you connect to the Internet on the TV,
confirm the connection method and make adjustments.
• Wireless LAN connection
is possible only when the
WPS (push button) method is used. If any other
method is used, make settings
by Smart TM > Internet
Setup > Intemet Connection.
(See Daaes 9-2 to 9-4.t
Completed:
The settings confirmation
screen is displayed.
Confirm the information
displayed
on the screen.
• "1: Except for LC-90LE657U
• See Initial Installation on
Daaes 2-2 to 2-7 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try "Easy Setup" again.
• If you select "Analog Search Start" and initiate the
channel search, the CH Memory for Cable Digital will be
deleted.
If Initial Installation
does not memorize all the channels in
your region, follow the instructions
below to manually
memorize the channels.
Air/Cable:
Make sure what kind of connection
is made
with your TV when selecting "Air" or "Cable".
CH Search:
Channel auto search makes the TV look for
all channels viewable in the set area,
CH Memory:
You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels,
(Channel selection disabled using CH
A,P_'.)
Off: Does not skip channels.
(Channel selection enabled
using C H/\/%,/.)
Remove Scrambled
CH: This function makes the TV look
for and then delete digital cable channels that are
scrambled
and so unavailable
in the set area. The
process may take more than 20 minutes.
Yes: Starts to remove scrambled
channels.
No: This function does not work.
• See Initial Installation
on
Daaes 2-2 to 2-7 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the
channel search, the CH Memory for Cable Digital will be
deleted.
ENG 4-14
Advertisement
