Advertisement
iiiiiii_z. _++; :% _iiE_ "+ c+. +i_!_7+.E._
:++ J'+_++ +ii_+4_
_;_ _..._iii: _ c" +;_... ,i++;_ J%ii_i_i)_i_ _iti)i_k_ % _i%._ j_;;
iliiliiililiiii
i i Iii=lliillillillI;,iiilillllillillillillillillillillillilliill,b l=l=so l
iliI%iiiiii
ilililIilIilIilIilIilIilIilIilIilIilii
No sound
Is connection
to other components
correct?
Is the volume too low?
Paae3-2
Is "Variable" selected
in "Output Select"?
Paae 4-20
Have you pressed MUTE on the remote control unit?
Paae3-3
Check the audio output of the connected
external equipment.
Is
the volume too low or muted?
When external equipment is connected
via an HDMI cable, you
may need to configure
the audio to be output through the HDMI
cable.
When audio is not output from external equipment
connected
to
the PC IN or HDMI IN 2 terminal, check the "Audio Select"
setting.
Paae8-2
Even when external equipment is connected
using an HDMI-
certified cable, an audio cable connection
may be required
depending on the type of equipment and the media being played
back. In this case, in addition to connecting an HDMI-certified
cable to the HDMI IN 2 terminal, connect a _ 3.5 mm stereo
minijack
cable to the AUDIO IN terminal and set "Audio Select" to
"HDMl+Analog".
Paae8-2
When connecting a PC via an HDMI-certified
cable, check the
following:
- Is the audio output of the PC configured
correctly? Check the
audio output settings and output audio format in Sound Properties
on the PC.
The audio formats compatible
with this TV are PCM, Dolby Digital
and DTS. With other formats,
audio cannot be output.
- Depending
on the board, only video signals may be output. In
this case, in addition to connecting
an HDMI-certified
cable to the
HDMI IN 2 terminal, connect a _ 3.5 mm stereo minijack
cable to
the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog".
Paae 8-2
l l lliiil,l,iii iiiliiliiliiliii
ix i ` ii iii ii ii ii ii ii iiii```'``
i ` `ii i ii ii ii ii ii ii ii ii ii
i i;iii
,iiiiiliiliiliiliiliiliilii
• No sound
• If you are using a DVI-HDMI
conversion cable to connect external
equipment to the TV, check the following:
- Is an audio cable connected?
The DVI-HDMI
conversion
cable
is for video only. Connect a _ 3.5 mm stereo minijack cable to
listen to the audio.
- Is HDMI IN 2 being used? When the TV is connected
to another
HDMI IN terminal, the audio and video are not output together
even if a _ 3.5 mm stereo minijack cable is connected
to the
shared AUDIO IN terminal for PC IN and HDMI IN 2.
- Check the "Audio Select" setting. Set "Audio Select" to
"HDMl+Analog".
Paae8-2
• Bluetooth
(smartphone)
playback cannot be
displayed on the TV.
• Check pairing.
• Miracast image/audio
• Check pairing.
cannot be output to the
TV.
ENG 11-7
Advertisement
