Advertisement
This function sets the terminal to output the computer audio.
The adjustment items vary depending on the input source. Select the input source corresponding
to the terminal connected
to the PC and then adjust the desired item.
To perform the operation,
refer to "Setup" > "Advanced"
> "Audio Select".
PC IN
Video:
Select this when the TV and PC are connected
using an analog RGB cable and the audio
is not input.
Video+Audio:
Select this when the TV and PC are connected
using an analog RGB cable and
the audio is input via a _ 3.5 mm stereo minijack.
HDMI 2
HDMl(Digital):
Select this when the TV and PC are connected
using an HDMI-certified
cable and
audio is input via the same cable.
HDMl+Analog:
Select this when the TV and PC are connected
using a DVI-HDMI
conversion
cable and the audio is input via a _ 3.5 mm stereo minijack.
• When "Audio Select" is set to "HDMl(Digital)",
sound will not be produced if you use only an
HDMI-certified
cable to connect HDMI-compatible
equipment.
To produce sound, you should
make an analog audio connection.
• If you want to connect HDMI-compatible
equipment
using only an HDMI-certified
cable, set
"Audio Select" to "HDMl(Digital)".
ENG 8-2
Advertisement
