Advertisement
You can change channels in several ways.
Method 1
Using CHZ*\_
on the remote control unit or on the TV.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit
channel
number
(e. g., Channel
5):
Press 5
ENTER
To select a 3-digit
channel
number
(e. g., Channel
115):
Press 1
1
5 -_
ENTER
To select a 4-digit
channel
number
(e. g., Channel
22.1):
Press 2 .>
2
• (DOT)
1
ENTER
Method 3
Selecting the program from the Channel
list.
1 Press INPUT on the remote control unit.
• The INPUT list displays.
2 Press _
to select "AIR" or "CABLE".
• The Channel list displays.
3 Press _V
to select the desired channel, and then press
ENTER.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made
if there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete
the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will
be made if there is no operation within a few seconds.
ENG 3-1
Advertisement
