Templates
3" Gauge (Tachometer) without Key Cut
Note: The 2" and 3" gauges are supplied with a locking tab and flat.
When installation is being done with a CNC machine, use the "with Key Cut" template. When installation is
being done with a hole saw, use the "without Key Cut" templates.
If this template has been downloaded electronically or copied from another document, please verify all template dimensions
prior to cutting as different printers/copiers may scale differently.
PANEL CUTOUT
w/out KEY CUT
+0.0000
3.415
-0.0200
U.S. to Metric
0.02 inches = 0.5mm
.1 inches = .mm
Electronic Control System: Installation Manual for BY Series Engines with Classic Controls
Page 1