Install The Engine; Connect The Items In The Engine Area - Yanmar BY series Installation Manual

Installation

Install the Engine

Install and align the engine per the instructions that come with the engine and the stern drive.

Connect the Items in the Engine Area

Route the CE500XX engine harness from the center of the transom to the top connector of the engine computer
box located on the starboard side of the engine. Route the power cable from the engine to the 80 amp engine
breaker installed earlier. Connect the ground to the common block and complete the connections per the diagram
on page 8.
Engine Harness Connection
Engine Electronics Connection
Electronic Control System: Installation Manual for BY Series Engines with Classic Controls
Page