Horizon Fitness CE4.3 Owner's Manual page 11

ASSEMBLY STEP 2
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
TOP FRONT COVER
CONSOLE MAST
CONSOLE MAST BOOT
TOP REAR COVER
Open HARDWARE BAG FOR STEP 2.
A
Carefully pull the CONSOLE CABLE through the
B
CONSOLE MAST using the twist tie located inside
the CONSOLE MAST.
CONSOLE CABLE
Attach the CONSOLE MAST to the MAIN FRAME
C
MAIN FRAME
using 4 BOLTS (A), 4 SPRING WASHERS (B)
and 4 FLAT WASHERS (C).
Attach the TOP FRONT COVER, followed by the
D
TOP REAR COVER and snap them together.
Slide CONSOLE MAST BOOT down to seal the
E
console mast hole.
NOTE: Be careful not to pinch any
wires while attaching the console mast.
HARDWARE FOR STEP 2:
SPRING WASHER (B)
BOLT (A)
20 mm 18 mm
Qty: 4 Qty: 4
FLAT WASHER (C)
20 mm
Qty: 4
11