Roller Assembly - Flymo Multimo 340 Operating Instructions Manual

B1
1. Turn product over.
2. Place both halves of the roller over the
location pegs as illustrated in fig.B1
3. Clip the roller together to secure it into
Assembly of Lower Handles to Lawnmower
C1
1. Pull the lower handle bolt until it locks into
position as illustrated in fig C1.
2. Place the Spring over the Bolt (C2)
D1
4. Insert the Barrel Nut into the Cam Lock as
illustrated in fig D1.
5. Ensuring the lower handle is in the correct position
D3
lower handle
cam lock
washer

Roller Assembly

C2
D2

pivot block
PAGE 4
B2
position.(B2)
• Do not clip the roller together before
placing over the location pegs
C3
3. Insert the Pivot Block on to the Bolt (C3)
Repeat for the other side.
(D2) Insert the Lower Handle, Washer and Cam
Lock on to the Bolt (D3) and turn the Cam Lock 3
times clockwise, as illustrated in fig D4.
D4
x3
"