Mulching Plug; Cutting Height Adjustment; Starting And Stopping - Flymo Multimo 340 Operating Instructions Manual

N
grassbox
full
P1
P3
Q
R
T
Grassbox Full Window
grassbox
empty

Mulching Plug

P2
P4

Cutting Height Adjustment

Starting and Stopping

S
U
1
• As the grassbox fills up, grass will be visible
through the window (N).
• When the window/grassbox is full it is time to
empty the grassbox.
Using as a mulcher
1. Your lawnmower is supplied with a mulching
plug. (P1)
2. Stop your lawnmower as described in Starting
and Stopping.
3. Lift safety flap and insert the mulching plug into
rear discharge chute. (P2) ensuring it is
securely fitted. (P3)
4. The mulching plug prevents grass from being
collected by blocking the collection chute on
the underside of the deck. (P4)
Cutting Height Adjustment
• Height of cut is adjusted by raising or lowering the
wheels using the height adjustment lever (Q)
• There are five heights of cut on this product.
• NOTE
A medium height of cut is recommended for
most lawns.
The quality of your lawn will suffer and
collection will be poor if you cut too low.
To Start your Lawnmower
1. Connect female extension cable connector to
the back of the switchbox. (R)
2. Form loop in mains cable and push the loop
through the slot. (S)
3. To secure, position loop over the hook and pull
the cable back through the slot (T).
4. Connect plug to mains and switch on.
5. Tilt the handle downwards to slightly raise the
front of the lawnmower and to reduce the risk
of lawn damage whilst starting.
The switchbox is provided with a lock-off
button (U1) to prevent accidental starting.
6. Press and hold the lock-off button (U) on the
switchbox, then squeeze one of the Start/Stop
levers towards the upper handle (V).
PAGE 7