Do you have a question about the EasiStore 300R and is the answer not in the manual?
Questions and answers
Anne Shepard
May 7, 2025
How to adjust the cutting height
1 comments:
Mr. Anderson
May 19, 2025
To adjust the cutting height on a Flymo EasiStore 300R:
1. Move both axles to the desired position in the E-Gate. 2. Ensure both sides of the axle are in the same position. 3. Choose from 3 height settings: - Low (20 mm) for well-maintained lawns. - Mid (40 mm) for most lawns. - High (60 mm) for overgrown grass.
Do not use the start levers alternately and do not disassemble the product beyond its delivered state.
While operating the machine always wear substantial footwear and long trousers. Do not operate the machine when barefoot or wearing open san- The FLYMO Lawnmower is intended to mow lawn in private domestic dals. Avoid wearing clothing that is loose fitting or that hanging cords or ties.
3. OPERATION f) Always allow the machine to cool down before storing. g) When servicing the blades be aware that, even though the power source is switched off, the blades can still be moved. DANGER! Risk of injury! h) Use only genuine replacement parts and accessories. Cut injury when the product starts accidentally.
Wait for the blade to stop, disconnect the product from the mains and use gloves before you maintain the product. The FLYMO spare parts are available from your FLYMO dealer or from the FLYMO service. To clean the mower:...
In the event of a warranty claim, no charge is levied to you for the services provided. Husqvarna UK Ltd. grants a warranty for all original FLYMO new products for two years from the date of original purchase from the retailer, provided that the devices have been for private use only.
In accordance with the German Product Liability Act, we hereby expressly declare that we accept no liability for damage incurred from our products where said products have not been properly repaired by a FLYMO-approved service partner or where original FLYMO parts or parts authorised by FLYMO were not used.
Need help?
Do you have a question about the EasiStore 300R and is the answer not in the manual?
Questions and answers
How to adjust the cutting height
To adjust the cutting height on a Flymo EasiStore 300R:
1. Move both axles to the desired position in the E-Gate.
2. Ensure both sides of the axle are in the same position.
3. Choose from 3 height settings:
- Low (20 mm) for well-maintained lawns.
- Mid (40 mm) for most lawns.
- High (60 mm) for overgrown grass.
Do not use the start levers alternately and do not disassemble the product beyond its delivered state.
This answer is automatically generated