Flymo Multimo 340 Operating Instructions Manual page 7

Grassbox Assembly
1. Locate the the grassbox halves together by
aligning the clips
located before clicking into position. (G1)
2. Locate the grassbox lid onto the assemble
grassbox by aligning the clips. Ensure all clips are
correctly located before clicking into position (G2)
Fitting Fully Assembled Grassbox to Lawnmower.
1. Lift safety flap (H1)
2. Make sure the discharge chute is clean and
free from debris (H2)
3. Locate fully assembled grassbox onto 2
location points (H3) at the rear of the deck as
illustrated in pic. J
4. Locate safety flap onto the top of the grassbox.
Ensure the grassbox is securely located.
• IMPORTANT ! AFTER FITTING ENSURE NO
GAP REMAINS BETWEEN THE SAFETY
FLAP AND THE GRASSBOX.
• Removal is the reverse procedure.
• For larger areas of grass where grass
collection is not required you can use your
lawnmower without the grassbox. The design
of the safety flap permits the cut grass to be
discharged downward behind the machine.
Your product can be used to cut grass using
the following methods:-
1. Grassbox Fitted:- grass is collected effectively
and compacted into the grassbox. (K)
2. Rear Discharge:- Effectively cuts long grass
with no need to empty the grassbox (L)
3. Mulch Plug Fitted:- grass cuttings are finely
chopped to return nutrients to your lawn (M).
See ʻMulching Plugʼ on page 7.
How to Mow
1. Start mowing the edge of the lawn nearest to
the power point so the cable is laid out on the
lawn you have already cut.
2. Mow twice a week during the growing season,
your lawn will suffer if more than a third of its
length is cut at one time and this may also
result in poor collection.
Do Not Overload Your Mower
Mowing long thick grass may cause the motor
speed to drop, you will hear a change in the
motor sound. If the motor speed drops you
may overload your lawnmower which may
cause damage. When mowing in long thick
grass a first cut with the cutting height set
higher will help reduce the load. See Cutting
Height Adjustment.
Grassbox Assembly (cont')
Ensure all clips are correctly
How to Mow
G1
H
1
3
J
K
L
M
PAGE 6
G2
2