Ford 2009 Expedition Owner's Manual page 135

Hide thumbs Also See for 2009 Expedition:
Table of Contents

Advertisement

Driver Controls
Setup menu
This menu allows the user, via the RESET stem located in the
instrument cluster, to interface and control the information displayed in
the message center for following selectable features:
• System Check
• Oil life
• Units (English/Metric)
• Autolamp
• Autolock
• Autounlock
• Language (English/French/Spanish)
Press and release the RESET stem to scroll through the INFO MENU
until following message "HOLD RESET FOR SETUP MENU" appears in
the display.
A brief press of the RESET stem
causes the display to turn off. Press
and release the RESET stem to exit
the blank display mode.
To access the SETUP MENU, press
and hold the RESET stem until the
following message "HOLD RESET FOR SYSTEM CHECK" appears in the
display.
Note: The first selection in the
SETUP MENU is System Check. To
get into System Check, press and
hold the RESET stem for two
seconds.
To skip the System Check entry,
briefly press the RESET stem to scroll through the remaining SETUP
MENU display sequence. If the RESET stem is not pressed within four
seconds, the message center display returns to the SETUP MENU entry
message "HOLD RESET FOR SETUP MENU".
System check
Selecting this function from the SETUP MENU causes the message
center to cycle through each of the systems being monitored. For each
of the monitored systems, the message center will indicate either an OK
message or a warning message for two seconds.
135
2009 Expedition (exd)
Owners Guide, 1st Printing
USA (fus)

Advertisement

Table of Contents
loading

Table of Contents