Adding Fuel - Princess auto 2.3 GPM @ 2,600 PSI GAS PRESSURE WASHER User Manual

V 2.0

ADDING FUEL

1. Set the pressure washer on a clean and level surface
in an area that is well ventilated.
2. Remove the fuel cap.
3. Insert a funnel into the fuel tank and carefully pour
gasoline into the tank until the fuel level reaches
1-1/2 in. below the top of the neck.
ATTACHING THE SPRAY GUN
1. Screw the spray waned and the trigger handle together until
they are secure.
2. Insert the inlet coupler of the spray hose into the threaded
fitting on the high pressure spray gun and thread the black nut
on by turning it clockwise until it is hand tight.
10
2.3 GPM @ 2,600 PSI GAS PRESSURE WASHER
For technical questions call: 1-800-665-8685
8384281
FIG. 3
FIG. 4
FIG. 3