Display Switching Part For "Display Type; A" And "Display Type B; C" And "Display Type D - Kenwood KDC-X959 Instruction Manual

"Display Type B"
"Display Type C"
The display of each part can be changed.
- Picture:
<Display switching part for "Display Type C" and "Display Type
D"> (page 16)
- Character information display:
<Display switching part for "Display Type A" and "Display Type
B">: (page 13)
<Display switching part for "Display Type C" and "Display Type
D">(page 16)
Display switching part for "Display Type A" and
"Display Type B"
When Display Type is set to "Display Type A" or "Display Type
B", the displayed contents are changed.
"Display Type A"
Character information display part a
Character information display part b
Character information display part c
"Display Type B"
Character
information display
Source type icon
Picture
1
Character Select the Display Type
information display
Press the [DISP] button.
2
Enter Display Control mode
Press the [S.A] button.
"Display Control" is displayed.
3
Switch character information display part b
Press the [FM] or [AM] button.
Switch character information display part c
(Only when Display Type is "Display Type A")
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.
4
Exit Display Control mode
Press the [S.A] button.
— 13 —
Character information display part a
Character information display part b
Character information display part c cannot display the same
information as character information display part b.