Adapting The Monitors To The Room Acoustics - Omnitronic PSM-6.5A User Manual

Depending on your taste or possibilities of installation, you can install the monitors vertically or horizontally.
Keep a minimum distance of 9 cm to the next wall
These monitors are magnetically shielded so that you can install them next to monitors, e.g. computers or
video processing devices. Nevertheless keep a minimum distance of 8 cm to the monitor. If the image of a
sensitive device is distorted nevertheless, increase the distance.
Please take your time to experiment with your new monitors without the pressure of a recording session so
that you get a feeling for these loudspeakers. If possible, use well-known sound material in order to feel the
neutrality of these monitors. Experiment with different locations and positions before using the possibilities of

adapting the monitors to the room acoustics.

6.2 Adapting the monitors to the room acoustics
Use the DIP-switches on the rear panel for adapting the monitors to the room acoustics.
Please do first try to compensate any sound coloration by changing the installation locations and positions.
Install your monitors in an isosceles triangle
where the distances between the speakers and
the listener are the same (a = b = c = ca. 90 cm).
24/26 11036473_V_1_0.DOC