Table of Contents
Advertisement
Viewing the Camera on a TV or VCR
Viewing the PNP-155 on a TV
After connecting the PNP-155 Camera directly to your TV and powering it on as
described on page 4, tune the TV to the correct input channel.
On your TV's remote control, the input button is usually labelled as Input, Source,
A/V, Channel 0, AUX etc.*
Viewing and Recording the PNP-155 on a VCR
Connect the PNP-155 into an available input channel on your VCR in the same
manner as the TV connection listed on page 4. Turn on your VCR and TV as if
you were about to play a VCR tape.
On your VCR's remote control, fi nd the input button with is usually labelled as L1,
L2, Input, Source, A/V, Channel, 0, AUX etc.* Insert a tape and push record to
record the camera.
*Consult the TV or VCR instruction manual for details about changing input
channels.
Tips & Suggestions
Before doing a permanent installation, connect the camera to your TV or VCR
using this Quick Start Guide to ensure all components in the pack are working
correctly.
If you have trouble with connecting the product contact our Technical Support
team. Contact details are on the back cover page of this guide.
Install cameras high enough or out of reach to avoid tampering.
Place Security Stickers in a visible location to alert potential thieves they are being
monitored.
Purchase a Swann DVR to record multiple cameras simultaneously and easily moni-
tor your property.
Place cameras in high traffi c areas such as doorways to maximise security.
Use only the included Power Supply and do not modify or cut wires.
6
6 6 6
Advertisement
Table of Contents
