Table of Contents
Advertisement
Troubleshooting Guide
Problem: I can't see the camera on my TV.
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the
correct input channel.
Problem: When I view my camera at night I only see a bright spot and no image.
Solution: Night Vision will refl ect when shining through a window. Move the
camera to the other side of the window or another location.
Problem: The BNC Extension Cable will not connect to my TV.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable
and plug into the TV.
Problem: On my Swann DVR, Video Loss appears where my camera should be.
Solution: Check the Extension cable is securely connected to the camera and
check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.
Technical Specifications
Video
Image Sensor
Video Quality
Number of Effective Pixels
Minimum Illumination
Day/Night mode
White Balance
Signal / Noise Ratio
Electronic Shutter
Gain Control
Backlight Compensation
Lens
Viewing Angle
Night Vision
Night Vision Distance
IR cut fi lter
Infra-red LEDs
Infra-red wavelength
Infra-red LED life
General
Indoor/Outdoor
Operating Power
Operating Temperature
Body Construction
Dimensions - Camera & Stand 4.3" x 2.1" x 1.8" / 110mm x 53mm x 45mm
Weight – Camera & Stand
1/3" Super CMOS
400 TV Lines
NTSC: 510 x 492 / PAL: 628 x 582
0 Lux (IR on)
Colour in lit area / Black & White when nightvision activates
Automatic
> 48dB
1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL
Automatic
Yes
6mm
50 degrees
Up to 26ft / 8m
No
11
850nm
10,000 hrs
Both
DC 12V
-4°F ~ 122°F / -20°C~ 50°C
Aluminum
9.9oz / 280g
7
7
Advertisement
Table of Contents
